3duke09

Guitars printed from a 3D printer have been available for a while now from odd.org.nz and cubify.com, but 3D printed ukulele’s have been left out in the dark up until recently. Some of the people who have created ukulele’s include engineering students from the Rochester Institute of Technology and ErikJDurwoodII, a user on Thingiverse.

Matthew is another person interested in making his own instruments and decided that 3D printing a ukulele would be a good start. Matthew has also created his own violins and other instruments before deciding to 3D print a ukulele.

3duke03 3duke10

The 3D printed ukulele that Matthew created was full sized and was 35cm in length. He used the 3D design program Solid Works to make the file for the ukulele, which took about a week to create and 37 hours to print all the components. The printer that was used to create the ukulele was a Stratasys Dimension 1200es 3D Printer.

It wasn’t all sunshine and rainbows for Matthew because the 3D printer had trouble printing the neck of the ukulele. According to Matthew the vertically printed neck had a much finer finish, but the printer wouldn’t print the frets. “It seems if the neck is in a certain orientation in the printer software the frets were eliminated” said Matthew. He decided to try print the neck horizontally, which worked apparently.

3duke05 3duke04

The entire cost of the ukulele was around a surprisingly low US$70 and it sounded good according to Matthew. Matthew wrote, “sounds remarkably like a ukulele”. After he put all the parts of the ukulele together, Matthew had to do some tweaking to get it playable.

We will be keeping a closer eye on Matthew to see what other creations he might just make.

http://www.youtube.com/watch?v=oig4rasveqw